Quickstarts
SPX simulator quickstarts
Start with short guides for launching protocol simulators, verifying live behavior, and connecting standard client tools.
Quickstarts
Hands-on starting points for the protocol simulator pages.
OPC UA quickstart
OPC UA Quickstart: Monitor a Workcell
Subscribe to a virtual workcell’s state and progress nodes, then observe a complete production cycle in your OPC UA client.
Modbus TCP quickstart
Modbus TCP Quickstart: Read a Virtual Meter
Read current from a virtual iEM3000 energy meter and verify a 30-second load change using your Modbus TCP client.
BACnet quickstart
BACnet Quickstart: Write an HVAC Setpoint
Write an HVAC temperature setpoint over BACnet/IP and verify the new value with a separate property read.
KNX quickstart
KNX Quickstart: Set a Lighting Level
Set a virtual lighting circuit to 35% and verify the actual brightness through KNX group readback.
MQTT quickstart
MQTT Quickstart: Send a Sensor Command
Send a temperature target to a virtual MQTT sensor, then verify the device reply and changing telemetry through your broker.